• LCD PH METER
 

SPECIFICATION

  • PH measuring range : 0.00 – 14.00 pH
  • Resolution : 0.01 pH, 0.1 °C
  • Accuracy : ±0.1 pH, ±1 °C
  • Automatic Temperature Compensation : 0 – 50 °C (32 – 122 °F)
  • Operating Temperature : 0 – 50 °C (32 – 122 °F)
  • Power: 4 x 1.5V AG-13 Button Cell Batteries (included)
  • Duration: 500 hrs
  • Dimensions : approx. 150 x 27 x 20 mm (5.90′ x 1.06′ x 0.79′ inch)
  • Weight : approx. 95 g

Operating Information:

  • Remove the protective cap. First rinse the electrode with distilled water and absorb it with filter paper. Turn on pH by pressing the ON/OFF switch located at the top of the battery case. Immerse the pH meter electrode in the solution, only up to the immersion level. Under no circumstances should you immerse above the display level. Stir gently and wait for the reading to stabilize.
  • After use, switch it off and use distilled water to clean the electrode. Replace the protective cap.

PH CALIBRATION:

Immerse the electrode in pH 6.86 (under the temperature of 25°C) standard buffer solution of phosphate, and gently shake the electrode.

Regulate the trimmer with a screwdriver until the buffer solution value corresponding to the measurement temperature is obtained.

Immerse the electrode in pH 4.01 or pH9.18 the standard buffer solution of borax and wait about one minute, until the buffer solution value corresponding to the measurement temperature is obtained.

PACKAGE:

  • 1 x pH meter
  • 2 x Calibration Solution (pH 4.003 & pH 6.864)
  • 1 x Mini Screwdriver
  • 1 x Instruction Manual
  • 1 x Sturdy Plastic Case

(N516)

SKU N516
Brand Growlush
Shipping Weight 0.6000kg
Shipping Width 0.080m
Shipping Height 0.040m
Shipping Length 0.160m
Unit Of Measure ea

Be The First To Review This Product!

Help other Nautel Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review